THE PRINTER WON’T TURN ON
If you are not able to turn your printer first you must check the power
The printer power button is switch on that is connected to the printer's electronics but not work properly
Power Supply Configurations
You should check your Printers With Built-in AC Adapters
PAPER JAMS
There are many reasons for it if you are getting this type of issue and We are sharing some reason below and you can check it and maybe it is helpful for you
Sure paper is properly aligned in the feed tray.
Gently tapping one end of your paper stack until all of the pages sit evenly in the tray.
You should remove wrinkled or damaged papers from the pile.
Avoid placing too many pages in the tray.
You must use the right size paper.
SLOW PRINTER SPEED
We know that all printer are not print at the same rate, if you’ve noticed a distinct slowdown in your printer’s work, you may need a solution to one of these common printer problems:
Sometimes, Incorrect settings
Sometimes you will get the issue the Printer is printing on both sides of the page
It’s in quiet mode
Sometimes printer Issues with the drivers (PostScript, PCL, manufacturer's host-based driver)
High print resolution
Connection types (USB, Wifi, Ethernet)
The page has too many images
DOCUMENTS PRINTING WITH STREAKS
First, you must remove the cartridge and rock it back and forth a few times over a trash can to evenly redistribute the toner powder. Some toner powder may emit from the cartridge as you do this.
If your printer does not work you should reinstall the toner cartridge and run a test print.
If your printer’s quality does not improve, you should check your printer’s user guide to see if there is a cartridge cleaning function built into the machine. If you can’t find your manual, you can usually find a digital copy by searching for it on Google.
You should clean the old function and run another test print.
Faded print/poor print quality
Sometimes, the printer is not working fine and we have to Print the Printer Settings report.
Adjust the print density in the printer driver.
Send a print job to the machine and review the print quality.
Turn off the toner save mode.
Perform a manual drum cleaning.
Wrinkled paper / Skewed images
If the cartridge is not supported and you are facing any issue, then you should install a supported one.
Sometimes, paper absorbs moisture due to high humidity. You should Store paper in its original wrapper until you are ready to use it.
The setting must match the paper loaded.
If your printer does not work You can also change the setting from the printer control panel.
Print your document.
Comments
Post a Comment